Doctor Chaotica was a holodeck character in The Adventures of Captain Proton.As the self-styled 'ruler of the cosmos', Chaotica was the sworn enemy of the planet Earth, and was constantly trying to conquer the world, with the aid of an army of minions, led by his faithful, if unintelligent henchman Lonzak.Chaotica's nemesis was none other than Captain Proton, the 'scourge of intergalactic evil.'
Hydraulic tubes and instrumentation tubes in a comprehensive range of corrosion-resistant stainless steels and nickel alloys covering outside diameters from (OD) 1.59 to 50 mm (0.0625 to 1.968 in.). All sizes are supplied with smooth surfaces and close dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.
Standard delivery form for Sandvik hydraulic and instrumentation tube is straight lengths of 6 meters, but our tubes can also be delivered as coiled tubing, contributing to reduced installation costs.
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day. Chaotica free download. Fractal Chaotica A open source, multiplatform, fractal generator and explorer. Includes Mandelbrot, Julia, Lambda.
Tubes with high cleanliness
Sandvik hydraulic tubes and instrumentation tubes are characterized by high cleanliness, and tubes with OD larger than 5 mm (0.196 in.) can be delivered with plugged ends for transport protection against inside contamination.
Grades
Grades and standards
The tables show Sandvik's standard grades for hydraulic and instrumentation tubing. Other grades can be offered on request.
Sandvik grade | UNS | ASTM | EN no. |
---|---|---|---|
Sandvik SAF 2507® | S32750 | - | 1.4410 |
Sandvik SAF 2205™ | S31803/S32205 | - | 1.4462 |
Sandvik SAF 2304® | S32304 | - | 1.4362 |
Sandvik grade | UNS | ASTM | EN no. |
---|---|---|---|
Sanicro® 70 | N06600 | Alloy 600 | - |
Sanicro® 60 | N06625 | Alloy 625 | 2.4856 |
Sanicro® 41 | N08825 | Alloy 825 | - |
Sanicro® 30 | N08800 | Alloy 800 | 1.4558 |
Sanicro® 28 | N08028 | - | 1.4563 |
Sandvik 2RK65 | N08904 | - | 1.4539 |
S31254 | - | 1.4547 | |
- | N04400 | - | - |
- | N02200 | - | - |
Sandvik grade | UNS | ASTM | EN no. |
---|---|---|---|
Sandvik 8R40 | S34700/S34709 | 347/347H | 1.4550/1.4912 |
Sandvik 5R75 | S31635 | 316Ti | 1.4571 |
Sandvik 3R65 | S31603/S31600 | 316L/316 | 1.4404/1.4401 |
Sandvik 3R60™ | S31603/S31600 | 316L/316 | 1.4435/1.4436 |
Sandvik 6R35 | S32100/S32109 | 321/321H | 1.4541/1.4940 |
Sandvik 3R12 | S30403/S30400 | 304L/304 | 1.4306/1.4301 |
* 254 SMO is a trademark of Outokumpu OY.
Standards
Sandvik 3R12 and Sandvik 3R60™
- EN 10216-5 TC1
- ASTM A213-AW (average wall)
- ASTM A269
- PED 97/23/EC
- OD <6 mm according to A632
- NACE MR0175/ISO 15156
Sandvik 5R75
- EN 10216-5
- PED 97/23/EC
254 SMO (UNS S31254)
- EN 10216-5 TC1
- ASTM A269
- PED 97/23/EC
- NACE MR0175/ISO 15156
Sandvik 2RK65™ (UNS N08904)
- EN 10216-5 TC1
- ASTM A213 A269
- PED 97/23/EC
- NACE MR0175/ISO 15156
Sanicro® 28 (UNS N08028)
- EN 10216-5 TC1
- ASTM B668
- PED 97/23/EC
- NACE MR0175/ISO 15156
Sanicro® 60 (UNS N06625)
- ASTM B444, Grade 1 and Grade 2
- ASME SB444, Grade 1 and Grade 2
- ISO 6207
Sandvik SAF 2507® (UNS S32750)
- EN 10216-5 TC1
- ASTM A789
- PED 97/23/EC
- NACE MR0175/ISO 15156
![Chaotica 2 0 23 Mm Chaotica 2 0 23 Mm](https://upload.wikimedia.org/wikipedia/commons/7/73/Blender_2.90-startup.png)
Metric sizes
Metric standard sizes
Tubes with OD up to and including 25,4 mm (1.0 in.) are supplied bright annealed. Singer sewing machine serial number g value. Tubes with OD larger than 25.4 mm are supplied in the annealed and pickled condition. Standard length = 6 meters.
Iffmpeg 6 2 5 – convert multimedia files between formats. For information about maximum working pressure for each size and grade, use our pressure calculation tool.
OD mm | WT mm | Kg/m | Sandvik 3R12 | Sandvik 3R60™ | Sandvik 5R75 | Sandvik 254 SMO |
---|---|---|---|---|---|---|
0.5 | - | C | - | - | ||
0.7 | - | C | - | - | ||
1.0 | C | C | C | |||
1.5 | - | C | - | |||
8 | 0.18 | C | - | |||
8 | 0.24 | C | - | |||
8 | 0.30 | C | - | - | ||
1.0 | C | C | - | |||
1.5 | C | C | C | |||
2.0 | C | C | - | |||
1.0 | C | C | C | |||
1.5 | C | C | C | |||
2.0 | C | C | C | |||
1.0 | C | - | - | |||
14 | 0.47 | - | - | - | ||
14 | 0.60 | C | - | |||
15 | 0.35 | C | - | - | ||
1.5 | C | C | - | |||
2 | C | C | - | |||
1.0 | C | - | - | |||
16 | 0.54 | C | - | |||
16 | 0.70 | C | - | |||
16 | 0.85 | - | C | - | ||
18 | 0.43 | C | - | - | ||
1.5 | C | C | - | |||
2.0 | C | C | C | |||
2.5 | - | - | C | - | ||
1.5 | - | C | - | |||
20 | 0.90 | C | - | |||
20 | 1.09 | - | C | - | ||
3.0 | - | - | C | - | ||
1.5 | C | C | - | |||
2.0 | C | C | - | |||
1.5 | C | - | - | |||
25 | 1.15 | C | C | |||
25 | 1.41 | C | - | |||
25 | 1.65 | C | - | |||
28 | 0.88 | C | - | |||
28 | 1.15 | C | - | |||
28 | 1.60 | C | - | - | ||
2.5 | - | C | - | - | ||
3.0 | C | C | - | |||
4.0 | - | C | - | |||
35 | 1.65 | C | C | - | ||
2.5 | - | - | - | |||
35 | 2.40 | C | - | - | ||
2.0 | - | - | - | |||
38 | 2.63 | C | - | |||
38 | 3.41 | - | C | - | ||
5.0 | - | C | - | |||
42 | 2.00 | - | C | - | ||
42 | 2.93 | C | - | |||
50 | 5.63 | - | - | - |
2.0 Movie Download
OD = outside diameter
WT = wall thickness
WT = wall thickness
Size OD, mm | Tolerances OD, mm | Wall thickness % |
---|---|---|
<4.76-2.38 | +0.08/-0 | +/- 10 |
Size OD, mm | Tolerances OD, mm | Wall thickness % |
---|---|---|
6-30 | +/-0.08 | +/-10 |
32-40 | +/-0.15 | +/-10 |
42 | +/-0.20 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness % |
---|---|---|
6-25 | +/-0.13 | +/-10 |
Imperial sizes
Imperial standard sizes
Tubes with OD up to and including 1.0 in. (25.4 mm) are supplied bright annealed. Tubes with OD larger than 1.0 in. are supplied in the annealed and pickled condition. Standard length = 6 meters.
For information about maximum working pressure for each size and grade, use our pressure calculation tool.
Imperial size1) | OD mm | WT mm | Kg/m | Sandvik 3R12 | Sandvik 3R60™ | Sandvik 2RK65™ | Sandvik SAF 2507® | Sanicro® 28 | Sanicro® 60 | 254 SMO* |
---|---|---|---|---|---|---|---|---|---|---|
1/16' x 28 BWG | 0.36 | - | C | - | - | - | - | - | ||
1/16' x 25 BWG | 0.51 | - | C | - | - | - | - | - | ||
1/8' x 22 BWG | 0.71 | - | C | - | - | - | - | - | ||
1/8' x 20 BWG | 0.89 | - | C | - | - | - | - | - | ||
3/16' x 20 BWG | 0.89 | - | C | - | - | - | - | - | ||
1/4' x 22 BWG | 0.71 | - | - | - | - | - | - | |||
1/4' x 20 BWG | 0.89 | C | C | - | C | C | ||||
1/4' x 20 SWG | 6.35 | 0.124 | C | - | - | - | - | |||
1/4' x 18 SWG | 6.35 | 0.157 | C | - | - | - | - | |||
1/4' x 18 BWG | 6.35 | 0.159 | - | C | - | C | C | |||
1/4' x 16 SWG | 6.35 | 0.193 | - | C | - | - | - | - | ||
1/4' x 16 BWG | 1.65 | - | C | C | - | C | - | |||
5/16' x 20 BWG | 7.94 | 0.157 | - | - | - | - | - | - | ||
5/16' x 20 SWG | 7.94 | 0.160 | - | - | - | - | - | - | ||
3/8' x 20 BWG | 9.53 | 0.193 | C | C | - | C | - | |||
3/8' x 20 SWG | 0.91 | - | C | - | - | - | - | |||
3/8' x 18 SWG | 1.22 | - | C | - | C | - | ||||
3/8' x 18 BWG | 9.53 | 0.257 | - | C | C | - | ||||
3/8' x 16 SWG | 9.53 | 0.322 | - | C | - | - | - | |||
3/8' x 16 BWG | 1.65 | - | C | C | C | C | ||||
3/8' x 14 SWG | 2.03 | - | C | - | - | - | - | - | ||
3/8' x 14 BWG | 2.11 | - | C | - | - | - | C | - | ||
1/2' x 20 SWG | 0.89 | - | C | - | C | - | ||||
1/2' x 20 BWG | 12.7 | 0.268 | C | - | - | - | - | |||
1/2' x 18 SWG | 12.7 | 0.350 | C | - | - | - | - | |||
1/2' x 18 BWG | 12.7 | 0.356 | C | C | - | C | - | |||
1/2' x 16 SWG | 1.63 | C | C | - | - | - | ||||
1/2' x 16 BWG | 1.65 | C | C | C | C | |||||
1/2' x 14 SWG | 12.7 | 0.542 | - | C | - | - | - | - | ||
1/2' x 14 BWG | 2.11 | - | C | - | - | C | C | |||
5/8' x 18 SWG | 15.88 | 0.448 | - | - | - | - | - | - | ||
5/8' x 18 BWG | 15.88 | 0.454 | - | - | - | - | - | - | ||
5/8' x 16 SWG | 15.88 | 0.582 | - | - | - | - | - | - | ||
5/8' x 16 BWG | 15.88 | 0.588 | - | - | - | - | - | - | ||
3/4' x 18 SWG | 19.05 | 0.544 | - | - | - | - | - | - | ||
3/4' x 18 BWG | 19.05 | 0.553 | - | - | C | - | - | - | ||
3/4' x 16 SWG | 1.63 | - | C | - | - | - | - | - | ||
3/4' x 16 BWG | 1.65 | - | C | - | - | - | - | - | ||
3/4' x 14 BWG | 2.11 | - | C | - | - | - | - | - | ||
3/4' x 13 BWG | 2.41 | - | C | - | - | - | - | - | ||
3/4' x 12 BWG | 2.77 | - | C | - | - | - | - | - | ||
1' x 18 SWG | 1.22 | - | C | - | - | - | - | - | ||
1' x 18 BWG | 1.24 | - | C | - | - | - | - | - | ||
1' x 16 BWG | 1.65 | - | C | - | - | - | - | - | ||
1' x 14 BWG | 2.11 | - | C | - | - | - | - | - | ||
1' x 13 BWG | 2.41 | - | C | - | - | - | - | - | ||
25.4 | 1.78 | - | - | - | - | - | - |
SWG = Standard Wire Gauge, BWG = Birmingham Wire Gauge
OD = outside diameter
WT = wall thickness
OD = outside diameter
WT = wall thickness
Tolerances
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
< 6–4.76 | +0.10 / -0 | +/-10 |
< 4.76–2.38 | +0.08 / -0 | +/-10 |
< 2.38 | +0.05 / -0 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
6.35 - 25.4 | +/-0.08 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
≤ 25.4 | +/-0.10 | +/-10 |
Size OD, mm | Tolerances OD, mm | Wall thickness, % |
---|---|---|
≤ 19.05 | +/-0.13 | +/-10 |
* 254 SMO is a trademark owned by Outukumpu OY.
Testing
Testing of stock standard tubing in straight condition
Sandvik hydraulic and instrumentation tubing are tested according to the standards as follows.
Standard | Tensile | Flattening | Corrosion | |
---|---|---|---|---|
EN 10216-5 TC1 | S | - | S1) | T 2) |
ASTM A269 | - | - | - 5) | |
ASTM A213 | S 3) | S | S | T 2) |
ASTM A789 | S | - | - | |
ASTM B668 | S | - 6) | S | T 2) |
ASTM A632 | S | - | - 5) |
S = Sampling, T = 100%
1) Either flaring or flattening test depending on tube size.
2) Eddy Current or hydrostatic test at option of Sandvik.
3) Also product analysis of a billet or tube from each heat.
4) Sandvik performs EN ISO 3651-2 Method A.
5) Sandvik performs ASTM A262 PrE.
6) Sandvik performs hardness test.
Coiled tubing
Coiled tubing
Dual wield fallout 4 mod. Sandvik stainless hydraulic tubes and instrumentation tubes can also be delivered in coils, contributing to reduced installation cost due to:
- Fewer connections
- Higher degree of materials utilization
- Improved system integrity
Metric sizes - standard sizes
(other sizes and lengths can be offered on request)
OD mm | WT mm | Orbital welded length, m | |
---|---|---|---|
0.5 | - | ||
3.0 | 400 | - | |
1.0 | - | ||
3.5 | 400 | - | |
0.75 | - | ||
3.5 | 350 | - | |
1.5 | - | ||
4.0 | 350 | - | |
0.75 | - | ||
4.0 | 300 | - | |
1.5 | - | ||
6.0 | 594 | ||
6.0 | 515 | ||
6.0 | 440 | ||
8.0 | 424 | ||
8.0 | 364 | ||
8.0 | 304 | ||
10.0 | 330 | ||
10.0 | 281 | ||
10.0 | 233 | ||
10.0 | 2.0 | 182 | |
12.0 | 270 | ||
12.0 | 229 | ||
12.0 | 188 | ||
12.0 | 2.0 | 146 |
OD = outside diameter
WT = wall thickness
WT = wall thickness
Imperial sizes - standard sizes
(other sizes and lengths can be offered on request)
Size, in. | Orbital welded length, ft |
---|---|
1,300 | - |
1,300 | - |
1,300 | - |
1,300 | - |
1,000 | - |
950 | - |
750 | - |
600 | - |
2.005 | |
1/4 x .049 | 27,864 |
1.256 | |
3/8 x .035 | 23,100 |
941 | |
3/8 x .065 | 13,661 |
612 | |
1/2 x .035 | 16,899 |
681 | |
1/2 x .065 | 9,740 |
427 | |
5/8 x .035 | 13,313 |
325 | |
5/8 x .065 | 7,565 |
203 | |
3/4 x .035 | 10,990 |
266 | |
3/4 x .063 | 6,187 |
*Minimum guaranteed length for ASTM 316/316L.
Chaotica 2 0 23 Mm =
Standards
ASTM | A213, A269, B163, B167, B668, A632, A789, A790 |
ASME | SA213, SB163, SB167, SB668, SA789, SA790 |
NACE | MR 0175 |
EN | 10216-5 TC1 |
Eddy Current or hydrostatic test at option of Sandvik.
Millimeters to Micrometer (Swap Units)Accuracy
Note: Fractional results are rounded to the nearest 1/64. For a more accurate answer please select 'decimal' from the options above the result.
2.0 Imdb
Note: You can increase or decrease the accuracy of this answer by selecting the number of significant figures required from the options above the result.
Note: For a pure decimal result please select 'decimal' from the options above the result.
Show formulaMicrometer to Millimeters formula
µm
1000.0
Show workingShow result in exponential formatMore information: MillimetersMicrometer to Millimeters table
Increments
Format
Print table< Smaller ValuesLarger Values >Micrometer | Millimeters |
---|---|
0µm | 0.00mm |
1µm | 0.00mm |
2µm | 0.00mm |
3µm | 0.00mm |
4µm | 0.00mm |
5µm | 0.01mm |
6µm | 0.01mm |
7µm | 0.01mm |
8µm | 0.01mm |
9µm | 0.01mm |
10µm | 0.01mm |
11µm | 0.01mm |
12µm | 0.01mm |
13µm | 0.01mm |
14µm | 0.01mm |
15µm | 0.01mm |
16µm | 0.02mm |
17µm | 0.02mm |
18µm | 0.02mm |
19µm | 0.02mm |
Micrometer | Millimeters |
---|---|
20µm | 0.02mm |
21µm | 0.02mm |
22µm | 0.02mm |
23µm | 0.02mm |
24µm | 0.02mm |
25µm | 0.03mm |
26µm | 0.03mm |
27µm | 0.03mm |
28µm | 0.03mm |
29µm | 0.03mm |
30µm | 0.03mm |
31µm | 0.03mm |
32µm | 0.03mm |
33µm | 0.03mm |
34µm | 0.03mm |
35µm | 0.04mm |
36µm | 0.04mm |
37µm | 0.04mm |
38µm | 0.04mm |
39µm | 0.04mm |
Micrometer | Millimeters |
---|---|
40µm | 0.04mm |
41µm | 0.04mm |
42µm | 0.04mm |
43µm | 0.04mm |
44µm | 0.04mm |
45µm | 0.04mm |
46µm | 0.05mm |
47µm | 0.05mm |
48µm | 0.05mm |
49µm | 0.05mm |
50µm | 0.05mm |
51µm | 0.05mm |
52µm | 0.05mm |
53µm | 0.05mm |
54µm | 0.05mm |
55µm | 0.06mm |
56µm | 0.06mm |
57µm | 0.06mm |
58µm | 0.06mm |
59µm | 0.06mm |